Richmond Hill runs from the condos along Yonge and Highway 7 to the large 1990s homes of Bayview Hill and Rouge Woods, the older streets around Mill Pond, and the newer subdivisions of Oak Ridges and Jefferson. Our crews come up from the Toronto office, and the bathroom finish, marble in one house and a fiberglass unit in the next, decides the anchoring.
Richmond Hill bathrooms, and what each one needs
- Yonge and Highway 7, Richmond Hill Centre condos. Tiled showers on hollow walls. Weekday-morning bookings, one cart, no permit needed.
- Bayview Hill, Rouge Woods, Doncrest. Large homes with porcelain, marble or granite ensuites. Slower drilling, different anchors, sealed holes, stated in the quote.
- Mill Pond, Crosby, North Richvale. 1960s to 80s homes with ceramic-tiled surrounds, our standard surface.
- Oak Ridges, Jefferson, Westbrook. Newer homes with one-piece fiberglass or acrylic units. We anchor into the wall behind the unit and the bar holds 500 lb.
What we install in Richmond Hill homes
- Brushed stainless steel grab bars, 18-inch and 24-inch, straight or L-shaped, diamond-knurled grip, covered end caps, no rust. Rated for 500 lb.
- Anchoring matched to the wall: ceramic tile as standard, porcelain, marble and granite with the extra drilling they need, fiberglass and acrylic surrounds, concrete and block, and a WingIts anchor on drywall. Every hole sealed against water.
- Fitted on the same visit: toilet safety rails, hand-held shower wands with a grab bar mount, anti-slip treatment for the tub floor, bath benches.
- Five-year parts and labour warranty on every installed bar. Fully insured, WSIB covered.
How a Richmond Hill visit works
- Photos first. Two pictures of the tub or shower. We reply with the bars we recommend, where each goes, and a firm quote. Nobody comes to sell you anything.
- The walkthrough. On the day, before any drilling, the installer shows the bars and confirms every position for how the person actually moves. If the bars are for a parent, we work with them directly.
- One visit, one to three hours. Bars are ready to use 12 hours later, once the sealant has set, and the bathroom is left clean.
A discharge from Mackenzie Health is the most common reason a Richmond Hill family calls, and most installations are scheduled within days of an approved quote. See how our grab bar installation works and free and funded grab bars for seniors in Ontario.
Grab bar installation in Richmond Hill: common questions
Can you install grab bars on marble in a Bayview Hill ensuite?
Yes. Marble, porcelain and granite need slower drilling with the right bits and different anchors, and every hole is sealed. That takes longer than ceramic tile and is stated in the quote.
Do you install grab bars in Richmond Hill condos?
Yes. Buildings along Yonge and Highway 7 are booked on weekday mornings, everything arrives on one cart, and no permit is needed.
Can grab bars go into a fiberglass unit in a newer Oak Ridges home?
Yes. We anchor through the unit into the hollow wall behind it with hardware made for that, and the bar carries 500 lb.
How soon can you come to Richmond Hill?
Crews come from our Toronto office. Once we have your photos and you approve the quote, most installations are scheduled within days.
What Richmond Hill-area customers say
“Grab bar installation should really be done by someone who installs them professionally. I am glad I chose Trenworks to install three grab bars in my bathroom for my elderly father. The installer did a fantastic job. I will recommend them to anyone who needs grab bars installed.”
Ann C.
“Thought you’d like to know that my girlfriend is super happy with the grab bars! It makes her feel much safer getting in and out of the tub, and honestly gives me so much more peace of mind, too.”
Sam P.
Call or text
289-809-5379 Toronto and the west GTA, voice or text
905-436-5965 Oshawa and Durham, voice or text
1-855-343-4514 Ontario toll-free, voice
Free assessment by photo, no home visit needed. Text two pictures of your tub or shower to 365-654-9174, send them by WhatsApp to 905-436-5965, or email info@trenworks.com. We reply with the bars we recommend, where they go, and a firm quote before anything is booked.
Nearby: Thornhill, Markham, Vaughan, Maple, Aurora, North York.
About Trenworks BathCutter
Grab bar installation & senior bathroom safety specialists serving Ontario since 2012. Home services since 2004.
Trenworks BathCutter (head office)
258 Centre Street South
Oshawa, ON L1H 4A9
Local Trenworks crews serve your area — factory-trained installers dispatched from bases throughout Ontario, not from head office.
Phone (24/7): 905-579-1283
Email: info@trenworks.com
Free assessment by photo — no in-home visit required. Send us pictures of your bathroom, we recommend the right bars, placement, and anchoring, then confirm the price before we install.